2008 Ford Pickup
Mileage
99,967
Service Date
5/30/2025
Services Performed
- Verified. Found P054C for EOT too high. Test drive. Verify concern. unit oil temp too hot. Coolant temp normal. Oil cooler is restricted. Remove vehicle cab. All 6 cage nuts spun. Body mounts collapsed and corroded. Unit had broken exhaust manifold hardware. leaking inlet piping and exhaust loose. Disassemble unit. Remove and replace engine oil cooler. Replace gaskets and seals as instructed by WSM. Re-seal turbocharger and pedestal. Install updated HP pump cover gasket. Replace soft steel lines.
- Remove and replace exhaust manifolds. Extract borken hardware out of cylinder heads. Replace all attaching hardware and gaskets. Replace inlet piping with dedicated inlet pipe set. Install EGR test equipment. Replace primary drive belt tensioner Replace all 6 cab mounts. Perform calibration update Repair exhaust system. Rotate tires Replace wiper blades. Fill with new fluids. Change engine oil and filter. Test drive to verify fix. Transmission has learn strategy. Shifting may be firm for up to 200 miles.
- Sadler
Maynard R. gave our service a 5 star review on 6/1/2025
