5.0(33 REVIEWS)
  • Mon: 8:00 am-5:00 pm
  • Tue: 8:00 am-5:00 pm
  • Wed: 8:00 am-5:00 pm
  • Thu: 8:00 am-5:00 pm
  • Fri: 8:00 am-5:00 pm
  • Sat: Closed
  • Sun: Closed
3400 State St Bettendorf, IA 52722
Schedule Appointment
(563) 424-1107

Ford

Home » Ford

  • 2016 Ford Transit-350

    Ford Transit-350
    Mileage
    158,070
    Service Date
    6/26/2025
    Services Performed
    • Custom Running boards
    • Shipping
    • Serviced unit. Change engine oil and filter. Lube chassis. Inspect unit for safety. Top off fluids. No other repairs needed at this time.
     
    Kraig K. gave our service a 5 star review on 6/26/2025

  • 2014 Ford Explorer

    Ford Explorer
    Mileage
    137,972
    Service Date
    6/12/2025
    Services Performed
    • A/C COMPRESSOR – Remove & Replace – Base,Limited,XLT,V6 – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
    • AIR CONDITIONING SYSTEM – Complete Charge – [Includes: Air Conditioning system recover, evacuate and recharge.]
    • Remove intake manifold install plugs
    • Serviced unit. Change engine oil and filter. Lube chassis. Inspect unit for safety. Top off fluids. No other repairs needed at this time.
     
    Chris S. gave our service a 5 star review on 6/13/2025

  • 2018 Ford Transit-350

    Ford Transit-350
    Mileage
    118,309
    Service Date
    6/4/2025
    Services Performed
    • Removed wiper cowl and motor/transmission assembly to access booster. Removed master cylinder and positioned aside. Removed fasteners anchoring booster to firewall from inside vehicle. Removed and replaced booster. Reassembled vehicle and verified repairs.
     
    Brad U. gave our service a 5 star review on 6/12/2025

  • 2008 Ford Pickup

    Ford Pickup
    Mileage
    99,967
    Service Date
    5/30/2025
    Services Performed
    • Verified. Found P054C for EOT too high. Test drive. Verify concern. unit oil temp too hot. Coolant temp normal. Oil cooler is restricted. Remove vehicle cab. All 6 cage nuts spun. Body mounts collapsed and corroded. Unit had broken exhaust manifold hardware. leaking inlet piping and exhaust loose. Disassemble unit. Remove and replace engine oil cooler. Replace gaskets and seals as instructed by WSM. Re-seal turbocharger and pedestal. Install updated HP pump cover gasket. Replace soft steel lines.
    • Remove and replace exhaust manifolds. Extract borken hardware out of cylinder heads. Replace all attaching hardware and gaskets. Replace inlet piping with dedicated inlet pipe set. Install EGR test equipment. Replace primary drive belt tensioner Replace all 6 cab mounts. Perform calibration update Repair exhaust system. Rotate tires Replace wiper blades. Fill with new fluids. Change engine oil and filter. Test drive to verify fix. Transmission has learn strategy. Shifting may be firm for up to 200 miles.
    • Sadler
     
    Maynard R. gave our service a 5 star review on 6/1/2025